Welch Allyn 901061 Propaq LT Vital Signs Monitor - User Manual - Manual (Page 53)

Directions for Use Standalone monitoring 49
Figure 48. Patient information entry
5. Enter the ID and name of the new patient.
a. Press or to highlight (blue) a character in the character field ( Figure 49 ).
b. Press to copy it to the green-highlighted location in the entry fields ( Figure 48 ).
c. Repeat from step a until all characters are entered into the field.
d. Press until the insertion point in the entry field changes from green to blue.
e. Press or to move the insertion point to another entry field.
f. Press to return to the character field.
g. Repeat from step a until all fields are complete.
Figure 49. Patient information entry (continued)
6. Highlight Confirm and press .
\
7. Verify that the patient mode (adult, pediatric, or neonate) is set correctly for this
patient.
Neonatal Term birth through 28 days, or up to 44 gestational weeks.
Pediatric Between 29 days and 12 years.
Adult 13 years and older.
If the current patient mode setting is not correct:
a. Highlight the current patient mode (Adult, Pediatric, or Neonate) and press .
b. From the Patient Mode selection menu, highlight the appropriate patient mode
and press
.
Note To correct an error in an entry field: Place the cursor ( step d and step e ) to the
right of the error location, highlight and enter Backspace in the character field to
delete the erroneous character, and then enter the correct character.
Note Name alone is not sufficient to confirm a patient ID; thus, you can confirm the
patient name only after you have entered the patient ID.
Last Last Middle Middle First First ID# ID# Rm# Rm#
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 1 2 3 4 5 6 7 8 9 0 -
Select ( ) to enter highlighted character Select ( ) to enter highlighted character
Confirm Confirm Cancel Cancel
Backspace Backspace
Entry fields
Character field
Last Last Middle Middle First First ID# ID# Rm# Rm#
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 1 2 3 4 5 6 7 8 9 0 -
Select ( ) to enter highlighted character Select ( ) to enter highlighted character
Confirm Confirm Cancel Cancel
HALL HALL E RO RO
Backspace Backspace
3456187 3456187
Next letter highlighted