HP NetRAID-4M Controller - Manual (Page 94)

5-16
Command Line Interface User’s Guide
0x01be868c1d74a640 and whose creator ID is 0xfafaf001007a1c00 is
deleted.
HPN0>disk_set delete 0x01be868c1d74a640 0xfafaf001007a1c00
Executing: disk_set delete 125,685,775,960,680,000
-361,712,932,956,267,520
After running the disk_set delete command to delete a diskset,
use the disk_set list command to display information about
your disksets, as in the following example. In the example, the
diskset specified for deletion does not appear in the listing, which
means that the diskset was deleted.
HPN0> disk_set list
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
Assigning Diskset Management
You can assign the Microsoft Cluster Service (MSCS) to manage a
diskset. You use the
disk_set OSmanaged command to assign the
MSCS to manage a diskset.
Note: It is recommended that you contact technical support
personnel before using the disk_set OSmanaged
command. It should only be used in some rare error
conditions to clear the
OSmanaged attribute.
Before assigning the MSCS management of a diskset, use the
disk_set list command to display information about your
disksets, as in the following example. In the example, the OS
Managed
column indicates NO, which means that the diskset is not
managed by the MSCS. Note that the example alters the disk_set
list output so that the data can fit on the page.