HP NetRAID-4M Controller - Manual (Page 318)

15-8
Command Line Interface User’s Guide
container create raid5 /cache /scrub ((0,0,0),30M) (0,1,0)
(0,2,0) (0,3,0) (1,0,0) (1,1,0) (1,2,0) (2,1,0) (2,2,0) (2,3,0)
(3,1,0) (3,2,0) (3,3,0)
container create stripe /cache ((0,0,0),100M) (0,1,0) (0,2,0)
(0,3,0) (1,0,0) (1,1,0) (1,2,0) (2,1,0) (2,2,0) (2,3,0) (3,1,0)
(3,2,0) (3,3,0)
container assign drive_letter 0 R
container assign drive_letter 1 S
container format /file_system=NTFS /quick/wait R
container format /file_system=NTFS /quick/wait S
Example 3
The script in this example accomplishes the following tasks:
■ Creates a snapshot of container
■ Backs-up a disk onto another disk
■ Removes the snapshot once the backup completes.
This script contains CLI commands and a DOS command. Because it
contains a DOS command (
backup d: e: ), it cannot be run from
the CLI command prompt. See the Command Line Interface Reference
Guide for information on each CLI command. See your DOS
documentation for a description of the
backup command.
afacli; open HPN0; container create snapshot /compact 0 1;
close; exit
backup d: e:
afacli; open HPN0; container remove snapshot 1; close; exit
❒