HP NetRAID-4M Controller - Manual (Page 136)

6-30
Command Line Interface User’s Guide
-- ------- ----- ------ ------ --- ------ ------- ------ -------------
0 0 Volume 30MB Valid 2:01:0 64KB: 15MB
Tigris 2:02:0 64KB: 15MB
Understanding State Attributes
A container’s state attribute indicates the current use of a container.
The container state attributes can be classified into the following
categories:
■ Mirror set
■ Container reconfiguration
■ Snapshot
■ RAID-5 set
The following sections discuss each category of container state
attributes.
Understanding Mirror Set State Attributes
The mirror set state attributes indicate the current use of the
mirror set. Table 6-8 lists the mirror set state attributes, the CLI
operations associated with these attributes, the CLI commands you
use to perform these operations, and the section that describes the
operation.
Table 6-8. Mirror Set State Attributes
The following sections describe the mirror set state attributes.
Attributes
CLI
Operations
Related Commands Discussed in...
mirror
set
create
Display container list Displaying a
Mirror Set Create
State
mirror
set
normal
Display container list Displaying a
Mirror Set
Normal State