HP NetRAID-4M Controller User Manual
Page 184

8-12
Command Line Interface User’s Guide
sets have been created. See Working with a Stripe Set on page 7-5 in
Chapter 7, Working With Single-level Containers, for information on
creating a stripe set. Use the
container list
command to display
information about your containers, as in the following example. In
the example, the Type column indicates two Stripe sets identified by
container IDs 0 and 1.
HPN0>
container list
Executing: container list
Cluster Num Total Oth Stripe Scsi Partition
Dr Partner Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ------- ----- ------ ------ --- ------ ------- ------ -------------
0 0 Stripe 200MB 32KB None 2:01:0 64.0KB: 100MB
2:02:0 64.0KB: 100MB
0 1 Stripe 200MB 32KB None 2:03:0 64.0KB: 100MB
2:04:0 64.0KB: 100MB
To create a stripe set of stripe sets, use the
container create
mstripe
command, as in the following example. In the example,
containers 0 and 1 are used to create a stripe set of stripe sets. The
stripe size is not specified; therefore, the stripe size is 32KB, which is
the default stripe size.
HPN0> container create mstripe 0 1
Executing: container create mstripe 0 1
Container 0 created
After running the
container create mstripe
command, use
the
container list
command to display information about the
stripe set of stripe sets, as in the following example. In the example,
the Type column indicates a top-level Stripe set whose container ID
is 0, and two underlying stripe sets whose container IDs are 63 and
62
. (Containers 63 and 62 are hidden containers.) These three
containers make up the stripe set of stripe sets. The Total Size
column indicates that the stripe set of stripe sets (container ID 0) is
400MB
(megabytes), which is the total size of the two underlying
stripe sets (container IDs 63 and 62). The Stripe Size column
indicates that the size of each stripe is 32KB (kilobytes).
HPN0> container list
Executing: container list
Cluster Num Total Oth Stripe Scsi Partition
Dr Partner Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ------- ----- ------ ------ --- ------ ------- ------ -------------