HP NetRAID-4M Controller - Manual (Page 54)

4-4
Command Line Interface User’s Guide
connected to the controller, which is Disk for device 2:01:0 and
2:02:0 .
HPN0> disk list
Executing: disk list
C:ID:L Device Type Blocks Bytes/Block Usage Shared
------ ------------ --------- ----------- ------------- ----
2:01:0 Disk 17783240 512 Initialized NO
2:02:0 Disk 17783240 512 Initialized NO
See the disk list command in the Command Line Interface
Reference Guide for a list of possible device types.
Displaying Removable Media
The removable media attribute indicates whether the media in a
device connected to a controller is removable, such as a diskette or a
CD-ROM.
To display whether the devices connected to a controller have
removable media, use the
disk list command, as in the following
example. Note that the Removable media column appears only if
you specify the
/full switch with the disk list command. In
the example, the Removable Media column displays Y if the media
is removable and N if it is not removable. The example shows that
device 2:01:0 has media that is not removable. (Note that the
example eliminates some items in the
disk list display to make
the example readable on this page.)
HPN0> disk list /full=TRUE
Executing: disk list /full=TRUE
C:ID:L Device Type Removable media Vendor-ID Product-ID Rev
------ ----------- --------------- --------- ----------- -----
2:01:0 Disk N ACME ST39102LW 0006
Displaying the Vendor ID
The vendor ID attribute identifies the name of a device vendor.
To display the vendor ID of the devices connected to a controller, use
the
disk list command, as in the following example. Note that
the Vendor ID column appears only if you specify the /full
switch with the disk list command. In the following example,