HP NetRAID-4M Controller - Manual (Page 22)

2-2
Command Line Interface User’s Guide
Note: If you specified the path to the afacli executable
program in the System Variables on Windows NT or
Windows 2000 (basic disk only), then you do not need to
specify the path when running
afacli . Otherwise, to run
the afacli program, you must change to the directory
where the afacli program resides.
Accessing the CLI from the Windows NT and
Windows 2000 Start Button
To access the CLI from the Windows NT or Windows 2000 Start
button, follow these steps.
Note: These steps assume that you accepted the default
location for the software during the installation procedure.
1 Click the Start button and move the mouse cursor to the
Programs
item. The Programs item displays a number of
choices (for example, HP NetRaid-4M).
2 Move the mouse cursor to the HP NetRaid-4M item. The HP
NetRaid-4M
menu appears.
3 Click on the AfaCli program icon on the HP NetRaid-4M
menu.
Accessing the CLI from the Flexible Array
Storage Tool Window
See the Flexible Array Storage Tool User’s Guide for information on
accessing the CLI from the FAST window.
Accessing the CLI from the NetWare Server
Console
To access the CLI from the NetWare server console, type load
hpncli at the prompt.