Shared channel 5-8 – HP NetRAID-4M Controller User Manual
Page 86

5-8
Command Line Interface User’s Guide
to a diskset. See Creating a Diskset on page 5-11 for information on
creating a diskset. You use the
disk_set changelabel
command
to change a diskset’s label. See Changing a Diskset’s Label on
page 5-20 for information on changing a diskset label.
To display a diskset’s label, use the
disk_set list
command, as
in the following example. In the example, the Label column
indicates Saturn, which is the diskset label.
HPN0> disk_set list
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
1 NO NO Saturn YES YES
Displaying if a Diskset Resides on a Controller with a
Shared Channel
The
shared
attribute indicates if a diskset resides on a controller
with a shared channel. Currently, disksets can only reside on a
controller that is on a shared channel.
To display if a diskset resides on a controller with a shared channel,
use the
disk_set list
command, as in the following example. In
the example, the Shared column indicates YES, which means that
the diskset resides on a controller on a shared channel.
HPN0> disk_set list
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
1 NO NO Saturn YES YES