HP NetRAID-4M Controller - Manual (Page 268)

10-12
Command Line Interface User’s Guide
HPN0> controller show unconfigured_snapshot
Executing: controller show unconfigured_snapshots
NVRAM is being used for unconfigured snapshots
To clear NVRAM that is being used for unconfigured snapshot
containers, use the
controller free_snapshot command, as in
the following example. In the example the controller free_snapshot
command clears NVRAM of unconfigured snapshot containers.
HPN0> controller free_snapshot
Executing: controller free_snapshots
After running the controller free_snapshot command , use
the controller show unconfigured_snapshot command to
verify that NVRAM has been cleared of unconfigured snapshots, as
in the following example. In the example, the command output
indicates that No NVRAM is being used for unconfigured
snapshots
.
HPN0> controller show unconfigured_snapshot
Executing: controller show unconfigured_snapshots
No NVRAM is being used for unconfigured snapshots
❒