HP NetRAID-4M Controller - Manual (Page 46)

3-22
Command Line Interface User’s Guide
The following sections describe how to display and, if appropriate,
manipulate the channel attributes.
Displaying a Channel Number
The channel number attribute identifies the number of each
channel present on a controller. The maximum number of channels
is determined by the controller model. Each channel is identified by
a channel number from 0 to the controller’s maximum number of
channels minus 1.
To display the channel numbers of an opened controller, use the
controller show channels command, as in the following
example. In the example, the Ch# column indicates that channels 0
and 1 are present on the controller.
HPN0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type Max Usage
--- ------- ------- --------- ---------
0 7 15 Ultra2LVD NoInfo
1 7 15 Ultra2LVD NoInfo
Displaying a Host Controller ID
The host controller ID attribute indicates the SCSI device ID
of the RAID host controller. By convention, the host controller ID is
7 .
To display the host controller ID, use the controller show
channels command, as in the following example. In the example,
the Host ID column indicates that the host controller ID is 7 for
channels 0 and 1:
HPN0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type Max Usage
--- ------- ------- --------- ---------
0 7 15 Ultra2LVD NoInfo
1 7 15 Ultra2LVD NoInfo