HP NetRAID-4M Controller - Manual (Page 49)

3-25
Working with Controllers
Table 3-3. Battery Attributes
Displaying the Condition of a Controller’s Battery
To display the condition of the battery, use the controller
details command, as in the following example. In the example,
the Battery State item indicates that the battery is Ok. See the
controller details command in the Command Line Interface
Reference Guide for a list of possible battery states.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: SUL9999B
Device Name: HPN0
Controller Type: HP NetRAID-4M
Access Mode: READ-ONLY
Controller Serial Number: Last Six Digits = A7F90F
Number of Channels: 4
Devices per Channel: 15
Controller CPU: Strong Arm 110
Controller CPU Speed: 233 Mhz
Controller Memory: 80 Mbytes
Battery State: Ok
.
.
.
Controller Hardware: 1.0
Use the controller details command intermittently to check
the progress of the battery reconditioning.
Battery
Attribute CLI
Operations
Related Commands Discussed in...
battery
state
Display
Recondition controller details
controller
battery_recondition
Displaying
the Condition
of a
Controller’s
Battery