HP NetRAID-4M Controller - Manual (Page 5)

v
Contents
Displaying the Revision Number 4-5
Displaying the Number of Blocks 4-6
Displaying the Bytes per Block 4-6
Displaying Disk Usage 4-6
Displaying Disk Defects 4-7
Initializing a Disk 4-8
Displaying the Initialization State of a Disk 4-9
Initializing a Disk 4-9
Working with a Default SCSI ID 4-9
Displaying the Current Default SCSI Device ID 4-10
Setting a Default SCSI Device ID 4-10
Working with Partitions 4-11
Understanding Partition Attributes 4-11
Verifying a Disk 4-18
Verifying a Disk Without Repairing Bad Blocks 4-18
Verifying a Disk and Repairing Bad Blocks 4-18
Blinking a Disk Light 4-19
Working with S.M.A.R.T. Disks 4-19
Understanding S.M.A.R.T. Attributes 4-20
5 Working with Disksets
Understanding Diskset Attributes 5-2
Displaying the Diskset ID 5-3
Displaying the Creator ID 5-4
Displaying the Owner 5-5
Displaying the Number of Disks in a Diskset 5-6
Displaying the Attached State of a Diskset 5-6
Displaying if a Diskset is Managed by the MS Cluster
Service 5-7
Displaying a Diskset’s Label 5-7
Displaying if a Diskset Resides on a Controller with a
Shared Channel 5-8
Displaying if a Diskset is a Member of a Spare Pool 5-9
Displaying the Diskset Creation Date and Time 5-9
Displaying Members of a Diskset 5-10
Creating a Diskset 5-11