HP NetRAID-4M Controller - Manual (Page 38)

3-14
Command Line Interface User’s Guide
Devices per Channel: 15
Controller CPU: Strong Arm 110
Controller CPU Speed: 233 Mhz
Controller Memory: 80 Mbytes
.
.
.
Controller Hardware: 1.0
Displaying the Controller Firmware Build Number
The controller firmware attribute indicates the controller’s
firmware build number.
To display the controller’s firmware build number, use the
controller details command, as in the following example. In
the example, the Controller Firmware item indicates Build #4528,
which means that the controller’s build number is 4528.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: SUL9999B
Device Name: HPN0
Controller Type: HP NetRAID-4M
Access Mode: READ-WRITE
.
.
.
Component Revisions
-------------------
CLI: 2.4-0 (Build #4530)
API: 2.4-0 (Build #4530)
Miniport Driver: 2.4-0 (Build #4530)
Controller Software: 2.4-0 (Build #4530)
Controller BIOS: 2.4-0 (Build #4530)
Controller Firmware: (Build #4528)
Controller Hardware: 1.0