HP INTEGRITY RX3600 User Manual
Hp integrity rx3600, User service guide
                        Table of contents                                                                        
                Document Outline
- HP Integrity rx3600
 - Table of Contents
 - About This Document
 - 1 Overview
 - 2 System Specifications
 - 3 Installing the System
- Safety Information
 - Installation Sequence and Checklist
 - Unpacking and Inspecting the Server
 - Installing Additional Components
- Removing and Replacing the Top Cover
 - Removing and Replacing the Memory Carrier Assembly Cover
 - Installing a Hot-Swappable Power Supply
 - Removing and Replacing Hot-Swappable Disk Drive Fillers
 - Installing a Hot-Pluggable Disk Drive
 - Installing a PCI/PCI-X/PCIe Card
 - Removing and Replacing the Memory Carrier Assembly
 - Installing System Memory DIMMs
 - Removing and Replacing the Processor Board Assembly
 - Installing a Dual-Core Processor
 
 - Installing the Server into a Rack or Pedestal Mount
 - Connecting the Cables
 - Console Setup
 - Accessing the Host Console
 - Powering On and Powering Off the Server
 - Core I/O Card Configuration
 - Installation Troubleshooting
- Troubleshooting Methodology
 - Troubleshooting Using the Server Power Button
 - Server Does Not Power On
 - EFI Menu is Not Available
 - Operating System Does Not Boot
 - Operating System Boots with Problems
 - Intermittent Server Problems
 - DVD Problems
 - Hard Drive Problems
 - Console Problems
 - Downloading and Installing the Latest Version of the Firmware
 
 - Enabling the Trusted Platform Module
 
 - 4 Booting and Shutting Down the Operating System
- Configuring System Boot Options
 - Booting and Shutting Down HP-UX
 - Booting and Shutting Down HP OpenVMS
 - Booting and Shutting Down Microsoft Windows
 - Booting and Shutting Down Linux
 
 - 5 Troubleshooting
- Methodology
 - Troubleshooting Tools
 - Errors and Reading Error Logs
 - Supported Configurations
 - CPU, Memory and SBA
 - System Power (BPS and I/O VRM)
 - Cooling Subsystem
 - Common I/O Backplane
 - Management Subsystem
 - I/O Subsystem
 - Booting
 - Firmware
 - Server Interface
 - Environment
 - Reporting Your Problems to HP
 
 - 6 Removing and Replacing Server Components
- Required Service Tools
 - Safety Information
 - HP Integrity rx3600 Component Classification
 - Accessing a Rack-Installed Server
 - Accessing a Pedestal-Installed Server
 - Removing and Replacing the Top Cover
 - Removing and Replacing the Memory Carrier Assembly Cover
 - Removing and Replacing a Hot-Swappable Chassis Fan Unit
 - Removing and Replacing a Hot-Swappable Power Supply
 - Removing and Replacing a Hot-Swappable Disk Drive Filler
 - Removing and Replacing a Hot-Pluggable Disk Drive
 - Removing and Replacing PCI/PCI-X/PCIe Card Dividers
 - Removing and Replacing a Hot-Pluggable PCI/PCI-X/PCIe Card
 - Removing and Replacing the DVD Drive
 - Removing and Replacing the Memory Carrier Assembly
 - Removing and Replacing the Front Bezel
 - Removing and Replacing the Processor Board Assembly
 - Removing and Replacing a Dual-Core Processor
 - Removing and Replacing the I/O Board Assembly
 - Removing and Replacing the System Battery
 - Removing and Replacing the I/O Voltage Regulator Module
 - Removing and Replacing the Trusted Platform Module
 - Removing and Replacing the Core I/O Board
 - Removing and Replacing the Core I/O Board Battery
 - Removing and Replacing the SAS Core I/O Card
 - Removing and Replacing the LAN Core I/O Card
 - Removing and Replacing the Display Board
 - Removing and Replacing the SAS Backplane Board
 - Removing and Replacing the Interconnect Board
 - Removing and Replacing the Midplane Board
 
 - A Customer Replaceable Units Information
 - B Upgrades
 - C Core I/O Card Utilities
- Integrated RAID
 - HP 8 Internal Port SAS HBA (SAS Controller)
- MPTUTIL Utility
 - EFI Commands
- DRVCFG Utility
- Starting the DRVCFG Utility
 - Using the DRVCFG Utility
 - Configuration Utility Screens
 - DRVCFG Screens
- Adapter List Screen
 - Adapter Properties Screen
 - RAID Properties Screens
 - Select New Array Type Screen
 - Create New Array Screen
 - View Array Screen
 - Manage Array Screen
 - SAS Topology Screen
 - Device Properties Screen
 - Device Format and Device Verify Screens
 - Advanced Device Properties Screen
 - Spinup Properties Screen
 - PHY Properties Screen
 - Exit the SAS Configuration Utility Screen
 
 
 - CFGGEN Utility
 
 - DRVCFG Utility
 
 - Smart Array P400, P600 and P800 Controllers
 
 - D Utilities
 - Index
 

