HP NetRAID-4M Controller - Manual (Page 37)

3-13
Working with Controllers
the Controller CPU Speed item indicates that the controller CPU
speed is 233 Mhz.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Device Name: HPN0
Controller Type: HP NetRAID-4M
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = A7F90F
Number of Channels: 4
Devices per Channel: 15
Controller CPU: Strong Arm 110
Controller CPU speed: 233 Mhz
.
.
.
Controller Hardware: 1.0
Displaying Controller Memory
The controller memory attribute indicates the total amount of
memory on a controller that programs can use.
To display the amount of controller memory, use the controller
details command, as in the following example. In the example,
the Controller Memory item indicates that 80 Mbytes is the amount
of controller memory available.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Device Name: HPN0
Controller Type: HP NetRAID-4M
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = A7F90F
Number of Channels: 4