HP NetRAID-4M Controller - Manual (Page 47)

3-23
Working with Controllers
Displaying the Maximum Number of Targets on a Channel
The targets or devices per channel attribute indicates the
maximum number of SCSI devices, not including the host controller,
that can reside on a channel.
To display the number of targets on a channel, use the controller
show channels command, as in the following example. In the
example, the Targets column indicates that there can be up to 15
targets on channels 0 and 1.
HPN0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type Max Usage
--- ------- ------- --------- ---------
0 7 15 Ultra2LVD NoInfo
1 7 15 Ultra2LVD NoInfo
Displaying a Channel’s Type
The channel type attribute identifies if a SCSI channel is
FastWide, SlowWide, Ultra, etc. Some examples of types include
Fast, Fast Wide, and FibreChnl. See the
controller show
channels command in the Command Line Interface Reference Guide
for an explanation of each possible channel type.
To display a channel type, use the controller show channels
command, as in the following example. In the example the Type
column indicates that Ultra2LVD is the channel type for channels 0
and 1.
HPN0> controller show channels
Executing: controller show channels
Ch# Host ID Targets Type Max Usage
--- ------- ------- --------- ---------
0 7 15 Ultra2LVD NoInfo
1 7 15 Ultra2LVD NoInfo