HP NetRAID-4M Controller - Manual (Page 293)

13-5
Working with Tasks
is running, and the Specific1 column indicates 00000000, which
means that no errors were found.
HPN0> task list
Executing: task list
Controller Tasks
TaskId Function Done% Container State Specific1 Specific2
------ -------- ------- --------- ----- --------- ---------
104 Verify 63.5% 00 RUN 00000000 00000000
Displaying Task Specific2 Information
The task specific2 attribute indicates the number of bad blocks
that were found and repaired by the disk verify command with
the /repair=TRUE switch. To display task specific2 information,
use the task list command, as in the following example. In the
example, the Specific2 column indicates 00000000, which means
that no errors were found and replaced.
HPN0> task list
Executing: task list
Controller Tasks
TaskId Function Done% Container State Specific1 Specific2
------ -------- ------- --------- ----- --------- ---------
105 Verify 63.5% 00 RUN 00000000 00000000
Displaying the Task Status
The task status attribute indicates the status of the currently
running task. Typically, the task status is "OK", which indicates that
a task is running correctly. Task status appears in a task status line,
as in the following example. In the example, the Stat item indicates
OK
, which means that the task is running correctly.
Stat:OK!, Task:106, Func:R53 Ctr:0 State:DNE 38.3%
Windows NT, Windows 2000 (basic disk only), UNIX, and NetWare
display the task status line as follows: