HP NetRAID-4M Controller - Manual (Page 18)

1-4
Command Line Interface User’s Guide
Conventions
The following typographical conventions are used in this user’s
guide.
In some examples in this document, a vertical line of dots replaces
part of a command’s output display to save space on the page, as in
the following example:
Device Name: HPN0
Controller Type: HP NetRAID-4M
.
.
.
Controller Hardware: 1.0
Related Documentation
This user’s guide is the core manual for learning about the tasks and
commands associated with the CLI. The Command Line Interface
Reference Guide is a companion volume to the user’s guide.
Use the Command Line Interface User’s Guide when you need to
perform a task such as create a container or verify a disk. Use the
Command Line Interface Reference Guide when you need specific
information about a CLI command (for example, syntax and
parameter descriptions).
The following are related documents:
■ Installation Guide
The installation guide that ships with your RAID controller
explains how to install it in your computer system. The
installation guide also provides instructions on how to install
the RAID software (FAST and the CLI).
bold Used to highlight information depicted in
examples (for example, the Type column indicates
that a RAID-5 set resides on container 0.)
Courier Used to highlight commands in text (for example,
the
container create mirror command)
and examples:
HPN0> container list
Executing: container list
No containers found.