HP NetRAID-4M Controller - Manual (Page 66)

4-16
Command Line Interface User’s Guide
C:ID:L Offset:Size Num Type Num Type R/W
------ ------------- --- ------ --- ------ ---
2:01:0 64.0KB: 100MB 62 Mirror 0 Stripe RW
2:02:0 64.0KB: 100MB 63 Mirror 0 Stripe RW
2:03:0 64.0KB: 100MB 63 Mirror 0 Stripe RW
2:04:0 64.0KB: 100MB 62 Mirror 0 Stripe RW
Displaying a Multilevel Container’s Type
The multilevel container type attribute indicates the kind of
a multilevel container in which the partition resides.
To display the multilevel container type in which the partition
resides, use the
disk show partition command, as in the
following example. In the example, the MultiLevel Type column
indicates that the container type is Stripe for multilevel container
number 0, which is the top level container in a stripe set of mirror
sets.
HPN0> disk show partition
Executing: disk show partition
Scsi Partition Container MultiLevel
C:ID:L Offset:Size Num Type Num Type R/W
------ ------------- --- ------ --- ------ ---
2:01:0 64.0KB: 100MB 62 Mirror 0 Stripe RW
2:02:0 64.0KB: 100MB 63 Mirror 0 Stripe RW
2:03:0 64.0KB: 100MB 63 Mirror 0 Stripe RW
2:04:0 64.0KB: 100MB 62 Mirror 0 Stripe RW
See the disk show partition command in the Command Line
Interface Reference guide for a description of the items that can
appear in this column.
Displaying and Changing a Partition’s Read/Write Accessibility
The read/write attribute determines the accessibility of a
partition. A partition can have read/write access or read-only
access.
To display a partition’s accessibility, use the disk show
partition command, as in the following example. In the example,