Displaying the number of channels, Displaying the number of channels 3-11 – HP NetRAID-4M Controller User Manual
Page 35

3-11
Working with Controllers
To display the controller’s CPU type, use the
controller
details
command, as in the following example. In the example,
the Controller CPU item indicates that Strong Arm 110 is the CPU
type.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Device Name: HPN0
Controller Type: HP NetRAID-4M
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = A7F90F
Number of Channels: 4
Devices per Channel: 15
Controller CPU: Strong Arm 110
.
.
.
Controller Hardware: 1.0
Displaying the Number of Channels
The
number of channels
attribute indicates the number of
channels on a controller.
To display the number of channels on a controller, use the
controller details
command, as in the following example. In
the example, the Number of Channels item indicates that 4
channels are on the controller. The number of channels that appears
here depends on the model of controller installed on your system.
See your controller installation guide for information on how may
channels your controller can have.
HPN0> controller details
Executing: controller details
Controller Information
----------------------
Device Name: HPN0
Controller Type: HP NetRAID-4M