HP NetRAID-4M Controller - Manual (Page 87)

5-9
Working with Disksets
Displaying if a Diskset is a Member of a Spare Pool
The spare attribute indicates if a diskset is a member of a spare
pool. A spare pool is a collection of disksets that function as spare
devices. When creating a diskset, you use the
disk_set create
command to assign a diskset as a spare diskset. See Creating a Diskset
on page 5-11 for information on creating a diskset. You can use the
disk_set changespare pool command to change a diskset’s
spare pool assignment. See Changing a Diskset’s Sparepool Assignment
on page 5-26 for information on changing a diskset’s spare pool
assignment.
To display if a diskset is a member of a spare pool, use the
disk_set list command, as in the following example. In the
example, the Spare column indicates YES, which means that the
diskset is a member of a spare pool.
HPN0> disk_set list
Executing: disk_set list
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare
------ -------- ---------- ---------- ------ -----
1 NO NO Saturn YES YES
Displaying the Diskset Creation Date and Time
The created attribute indicates the date and time that a diskset
was created.
To display the date and time that a diskset was created, use the
disk_set list command with the /full switch, as in the
following example. In the example, the Created column indicates
that the diskset was created on 5/26/2000-14:30:56.
HPN0> disk_set list /full=TRUE
Executing: disk_set list /full=TRUE
Diskset ID Creator ID Owner
------------------- ------------------ ------------------
0x01be868c1d74a640 0xfafaf001007a1c00 \\.\HPN0
Disks Attached OS Managed Label Shared Spare Created