HP Integrated Lights-Out 4 - Manual (Page 323)

Resetting iLO by using the iLO 4 Configuration Utility
If iLO is slow to respond, you can use the iLO 4 Configuration Utility Reset iLO menu to perform a
reset.
Resetting iLO does not make any configuration changes, but it ends all active connections to iLO.
You must have the Configure iLO Settings privilege to reset iLO using this method.
To reset iLO:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration Utility→Reset
iLO.
The iLO 4 Configuration Utility prompts you to select YES or NO.
Figure 174 Setting Options screen
5. Select YES, and then press Enter.
The iLO 4 Configuration Utility prompts you to confirm the reset request, as shown in
Figure 175 (page 324) .
Troubleshooting miscellaneous issues 323