HP Integrated Lights-Out 4 - Manual (Page 149)

Power down the server. 1.
2.
Remove the top cover.
3. Insert or remove the SD card.
•
iLO Date/Time—The internal clock of the iLO subsystem. The iLO clock can be synchronized
automatically with the network.
Viewing the active iLO sessions
To view the active iLO sessions, navigate to the Information
→Overview page, as shown in
Figure 71
(page 147) .
The Active Sessions section displays the following information for all users logged in to iLO:
•
Login name
•
IP address
•
Source (for example, iLO web interface, Remote Console, or SSH)
Viewing iLO system information
The iLO System Information page displays the health of the monitored subsystems and devices.
The information that you can view depends on whether you are using Agentless Management or
SNMP Pass-thru, and whether AMS is installed. For more information, see
“Configuring iLO
Management settings” (page 106) .
The System Information page includes the following embedded health tabs: Summary, Fans,
Temperatures, Power, Processors, Memory, Network, Storage, and Firmware.
Viewing health summary information
The Health Summary page displays the status of monitored subsystems and devices. Depending
on the server type, the information on this page varies.
If the server is powered off, the system health information on this page is current as of the last
power off. Health information is updated only when the server is powered on and POST is complete.
To view health summary information, navigate to the Information
→System Information page, and
then click the Summary tab to view the list of monitored subsystems and devices, as shown in
Figure 72 (page 150) .
Redundancy information is available for the following items in the list:
•
Fan Redundancy
•
Power Status
Summarized status information is available for the following items in the list:
•
BIOS/Hardware Health
•
Fans
•
Memory
•
Network
•
Power Supplies
•
Processors
•
Storage
•
Temperatures
Viewing iLO system information 149