HP Integrated Lights-Out 4 User Manual
Page 202
•
Server Startup and Server Prefailure sequences are saved automatically in iLO memory. They
will be lost during firmware upgrades, iLO reset, and power loss. You can save the captured
video to your local drive by using the .NET IRC.
•
The Server Startup file starts capturing when server startup is detected, and stops when it runs
out of space. This file is overwritten each time the server starts.
•
The Server Prefailure file starts capturing when the Server Startup file is full, and stops when
iLO detects an ASR event. The Server Prefailure file is locked when iLO detects an ASR event.
The file is unlocked and can be overwritten after it is downloaded through the .NET IRC.
•
The Console Capture control buttons are located on the bottom of the .NET IRC session window.
explains the playback controls used for viewing a captured video.
Table 14 Playback controls
Function
Name
Control
Restarts playback from the beginning of the file
Skip to Start
Pauses the playback
Pause
Starts playback if the currently selected file is not
playing or is paused
Play
Records your .NET IRC session
Record
Shows the progress of the video session
Progress Bar
Viewing Server Startup and Server Prefailure sequences
1.
Start the .NET IRC.
2.
Press the Play button.
The Playback Source dialog box opens, as shown in
Figure 104 Playback Source dialog box
3.
Select Server Startup or Server Prefailure.
4.
Click Start.
Saving Server Startup and Server Prefailure video files
1.
Start the .NET IRC
2.
Press the Play button.
3.
Select Server Startup or Server Prefailure.
4.
Click Start.
202 Using iLO