HP Integrated Lights-Out 4 User Manual
Page 184
iLO 4 firmware version 1.40 and later supports the following iLO Federation Management features:
•
Group health status
•
Group Virtual Media
•
Group power control
•
Automatic Group Power Capping
•
Group firmware update
For iLO Federation Management configuration instructions, see
.
When using the iLO Federation Management features, note the following:
•
The iLO Federation Management features are not supported with the iLO Shared Network
Port configuration.
•
iLO Federation Management supports both IPv4 and IPv6.
•
When you select a group from the Selected Group list on an iLO Federation Management
page, the page display and the changes you make on the page will apply to all of the servers
in the selected group.
•
After you select a group, you can filter the servers in the list by clicking one of the following:
Health status—Click a health status link to filter the list of servers. For example, you could
click the Degraded link to show only servers in the Degraded status.
◦
◦
Model type—Click a server model number link to show only the servers matching the
selected model.
◦
Firmware information—Click a firmware version or status to only the servers matching
the selected firmware version or status.
When you filter the list of servers, the changes you make on iLO Federation Management
pages apply to all of the servers in the selected group that meet the filter criteria. Filtering
selections are persistent across all of the iLO Federation Management pages.
•
The group that is selected in the Selected Group list is saved in a cookie and remains persistent
even when you log out of iLO.
•
Any user can view information on iLO Federation Management pages, but a license is required
to make changes. For more information about iLO licensing, see the following website:
.
Viewing the iLO Federation Management Multi-System Map
The Multi-System Map page displays information about the iLO systems in a selected group.
The Summary section lists the number of systems in the group and the iLO Peers table lists the iLO
systems that the local iLO has identified as its closest neighbors or peers. The local iLO identifies
its peers via multicast discovery.
For more information about multicast discovery, see
“Configuring iLO Federation Management”
.
A license is required if you want to use the iLO Federation Management features to make
configuration changes. For more information about iLO licensing, see the following website:
To view the Multi-System Map:
184 Using iLO