Verifying the ams installation, Verifying ams installation: windows – HP Integrated Lights-Out 4 User Manual
Page 108
•
If you must run AMS with the Insight Management Agents on Linux systems, start the hp-ams
daemon process first, and then decrease the number of traditional agents (for example,
cmasm2d
) running on the system. For more information about AMS on Linux systems, see the
manpage for hpHelper, the AMS daemon process.
•
When you install AMS on Windows systems, the Agentless Management Service Control
Panel is installed. You can use the Control Panel to configure SNMP settings, to enable or
disable AMS, and to remove AMS.
•
AMS writes operating system configuration information and critical events to the Active Health
System Log.
•
Use one of the following methods to obtain the AMS software or the Insight Management
Agents:
◦
HP Service Pack for ProLiant (Windows, Red Hat, SLES)—Navigate to the following website
to download the SPP:
.
For instructions on using the HP Service Pack for ProLiant to install AMS or the Insight
Management Agents, see the Service Pack for ProLiant documentation.
◦
HP Support Center (Windows, Red Hat, SLES, VMware)
1.
Navigate to the technical support page on the HP website:
2.
Select a country or region.
The HP Support page opens.
3.
Click the Drivers & Downloads link.
In the search box, enter the server model that you are using (for example, DL360p).
A list of servers is displayed.
4.
Click the link for your server.
The HP Support Center page for the server opens.
5.
Click the link for the server operating system.
6.
Download the software.
7.
Follow the installation instructions provided with the downloaded software.
◦
Software Delivery Repository (Ubuntu)—Download AMS or the Insight Management
Agents from the mcp section of the Software Delivery Repository at
.
◦
Software Delivery Repository (VMware)—Download AMS or the Insight Management
Agents from the vibsdepot section of the Software Delivery Repository website at
.
AMS is also included in the customized HP VMware ISO images that are released on HP
Software Depot (
.
Verifying the AMS installation
Use the following procedures to verify the AMS installation on Windows, Linux, and VMware
systems.
Verifying AMS installation: Windows
To verify that AMS is enabled on a Windows system:
1.
Open the Windows Control Panel.
If the Agentless Management Service Control Panel is present, then AMS is installed.
108 Configuring iLO