HP Integrated Lights-Out 4 User Manual
Page 300
Table 17 Event log entries (continued)
Description
Event log entry
The SNMP trap did not connect to the specified IP address.
Server reset SNMP trap alert
failed for:
The SNMP trap did not connect to the specified IP address.
Illegal login SNMP trap
alert failed for: address> The SNMP trap did not connect to the specified IP address. Diagnostic error SNMP trap alert failed for: address> The SNMP trap did not connect to the specified IP address. Host generated SNMP trap alert failed for: address> The SNMP trap did not connect to the specified IP address. Network resource shortage SNMP trap alert failed for: The network is connected to iLO. iLO network link up The network is not connected to iLO. iLO network link down A user started a firmware upgrade. iLO Firmware upgrade started by: A user reset the host server. Host server reset by: A user powered off the host server. Host server powered OFF by: A user powered on a host server. Host server powered ON by: A user began using a virtual floppy. Virtual Floppy in use by: A user logged in to a Remote Console session. Remote Console login: A Remote Console session was closed. Remote Console Closed A console login failed with the specified login and IP address. Failed Console login - IP Address: A local user was added. Added User: A local user was deleted. User Deleted by: A local user was modified. Modified User: A valid user logged in to iLO by using an Internet browser. Browser login: A valid user logged out of iLO by using an Internet browser. Browser logout: An authorized user logged in by using the Remote Console port. Remote Console login: An authorized Remote Console user was logged out or the Remote Console Remote Console Closed An unauthorized user failed three login attempts when using the Remote Console Failed Console login ? IP Address: A new entry was made to the authorized user list. Added User: An entry was removed from the authorized user list. The User section displays User Deleted by: The power was reset. Power Cycle (Reset): 300 Troubleshooting
port was closed after a failed login attempt.
port.
the user who requested the removal.