HP Integrated Lights-Out 4 - Manual (Page 28)

Figure 10 Removing user accounts
5. Select the user that you want to remove, and then press Enter.
The iLO RBSU prompts you to confirm the request.
6. Press Enter to confirm the request.
7. Select File
→Exit to exit iLO RBSU.
Managing iLO users by using the iLO 4 Configuration Utility
You can use the iLO 4 Configuration Utility to perform the following user management tasks:
•
“Adding iLO user accounts by using the iLO 4 Configuration Utility” (page 28)
•
“Editing or removing user accounts” (page 30)
Adding iLO user accounts by using the iLO 4 Configuration Utility
You can use the iLO 4 Configuration Utility User Management menu to configure local iLO user
accounts.
To configure local iLO user accounts:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration Utility→User
Management.
The User Management screen appears, as shown in Figure 11 (page 29) .
28 Setting up iLO