HP Integrated Lights-Out 4 - Manual (Page 138)

1. Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration
Utility
→Network Options.
The Network Options screen appears, as shown in Figure 67 (page 138) .
Figure 67 Network Options screen
5. View or update the following values, as needed:
•
MAC Address (read-only)—The MAC address of the selected iLO network interface.
•
Network Interface Adapter—Specifies the iLO network interface adapter to use. Select
ON or OFF to enable or disable the iLO Dedicated Network Port. Select Shared Network
Port to use the Shared Network Port.
The Shared Network Port option is available only on supported servers.
For more information about using the Shared Network Port, see “Configuring and using
the iLO Shared Network Port” (page 100) .
•
Transceiver Speed Autoselect—Enables iLO to negotiate the highest supported link speed
and duplex settings when connected to the network.
•
Transceiver Speed Manual Setting—Sets the link speed for the iLO network interface.
•
Transceiver Duplex Setting—Sets the link duplex setting for the iLO network interface.
•
DHCP Enable—Configures iLO to obtain its IP address (and many other settings) from a
DHCP server.
138 Configuring iLO