HP P6000 Performance Advisor Software - Manual (Page 159)

A Object types and properties
The following tables provide the list of properties that will be state monitored for each object type,
if the corresponding objects are selected for state data monitoring:
Table 1 – lists the parameters for the Controller, Disk Group, Physical Disk, and Data Replication
Group object types:
Data Replication Group Physical Disk Disk Group Controller
Name Name Name Name
Async Minimum Log Size WWID Current Spare Policy Operational State
Current Log Level Shelf Number Disk Type Operational State Detail
DRM Log Size Bay Number Leveling Progress
DRM Mode Disk Type Leveling State
Fail Safe Locked Size Number of Disks
Fail Safe Mode Failure Predicted Occupancy Alarm
Full Copy State Firmware Version Requested Spare Policy
Log Disk Reserved Capacity Media Accessible Total Storage Space (GB)
Log Disk Used Space Migration Progress Used Storage Space (GB)
Member Virtual Disks Migration State Transition State
Online Controller Model Number VRAID0 Capacity (GB)
Preferred Port Occupancy VRAID1 Capacity (GB)
Requested Maximum Log
Size Quorum Disk VRAID5 Capacity (GB)
Suggested Aysnc Log Size Requested Usage VRAID6 Capacity (GB)
Suggested Sync Log Size Actual Usage Operational State
Operational State Operational State Operational State Detail
Operational State Detail Operational State Detail
Table 2 – lists the parameters for the Storage System, Host Port, Host, and Virtual Disk object types:
Virtual Disk Host Host Port Storage System
Name Name Host Port Address Name
Disk Group Name Operating System Type Port Condition WWN
DRM Group Mode HBAs Port WWN Available Storage Space
LUN WWN Name Firmware Version
Mirror Cache Management Host IP
DRM Group ID Total Storage Space
Online Controller Used Storage Space
Preferred Path Operational State
Presentations Operational State Detail
Read Cache
159