HP P6000 Performance Advisor Software - Manual (Page 74)

IMPORTANT: If the storage system is re-initialized, remove the storage system from the currently
monitored list and add it back for monitoring again. For more information, see “Adding performance
objects for monitoring” (page 55) .
Procedure
To view monitoring settings configured for storage systems in an instance of HP P6000 Performance
Advisor:
1.
In the Navigation pane, click Settings.
2. From the list, click the plus (+) sign for an HP P6000 Performance Advisor instance.
3. From the list, select Configuration and click the Performance tab in the Content pane.
The table displays the storage systems added for monitoring under the Monitoring tab. If the table
is blank, click Add. For more information, see
“Adding storage systems” (page 55) .
The following table describes the data:
The user-friendly name of the storage system. Storage System Name
The unique WWN of the storage system. Storage System WWN
The IP address or server name of the HP P6000 Command
View instance that manages the storage system monitored P6000 Command View IP Address
by HP P6000 Performance Advisor. HP P6000 Performance
Advisor receives state data of the storage system through
this specific HP P6000 Command View instance.
The license type and status associated with the storage
system. This information is derived from HP P6000 License Status
Command View, see “Licensing behavior in HP P6000
Performance Advisor” (page 88) .
Displays one of the following: Data Collection Enabled
•
Started, if you started the data collection for the storage
system. The current status on data collection is displayed
in the HP P6000 Performance Advisor Summary window
under the Monitoring Status column.
•
Stopped, if you have stopped the data collection for the
storage system.
For more information, see “Viewing the HP P6000
Performance Advisor configuration summary” (page 88) .
Displays one of the following: Threshold Profile
• Name of the threshold profile if you associated the
storage system with a threshold profile.
•
Custom, if you selected counters and specified threshold
levels when adding the storage systems.
• Blank, if the storage system is not threshold monitored.
Viewing configured monitoring settings for other performance objects
In addition to storage systems, you can view the settings configured for performance objects that
belong to the following object types:
•
Virtual Disks
•
Hosts
•
Disk Groups
•
Data Replication Groups
74 Working with HP P6000 Performance Advisor