Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 99)

Brocade Virtual ADX MIB Reference 87
53-1003312-01
ACLs
ACl bind to port table (snAgAclBindToPortTable)
The ACL Bind to Port Table contains ACL port bindings for a Layer 3 Switch. Port numbers and bind
direction are used to index entries.
This table has been deprecated.
snAgAclIcmpCode
(Continuation) Valid value for type code 14, Timestamp request
•
1 = Timestamp request
Valid value for type code 15,Timestamp reply
•
1 = Timestamp reply
Valid value for type code 16, Information request
•
1 = Information request
Valid value for type code 17 Information reply
•
1 = Information reply
Valid value for type code 18 Address mask request
•
1 = Address mask request
Valid value for type code 19 Address mask reply
•
1 = Address mask reply
Name, OID, and Syntax Access Description
snAgAclBindToPortTable
brcdIp.1.2.2.15.3 None The ACL Bind to Port Table
snAgAclBindToPortEntry
brcdIp.1.2.2.15.3.1 None An entry in the ACL Bind to Port table
snAgAclPortNum
brcdIp.1.2.2.15.3.1.1
Syntax: Integer32 Read only Shows the format of port number..
•
LS octet – port number (max 255)
•
Next octet – slot number (max 255)
•
MS Octet:
0 (phy) – 0000 to 0FFFF
1 (ve) – 10000 to 1FFFF
snAgAclPortBindDirection
brcdIp.1.2.2.15.3.1.2
Syntax: Direction Read only Shows the traffic direction to which the ACL will be applied:
•
inbound(0)
•
outbound(1)
snAgAclNum
brcdIp.1.2.2.15.3.1.3
Syntax: Integer32 Read-write Shows the defined ACL number that will be bound to the port.
snAgAclNameString
brcdIp.1.2.2.15.3.1.4
Syntax: DisplayString Read-write Shows the defined ACL name that will be bound to the port.
Name, OID, and Syntax Access Description