Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 19)

Brocade Virtual ADX MIB Reference 7
53-1003312-01
Partially supported standards
Partially supported standards
Portions of the following standard MIBs are supported on the devices. Refer to the following
sections for a list of supported objects:
• “RFC 1213: Management Information Base (MIB-II)” on page 7
• “RFC 1493: Definitions of managed objects for bridges” on page 8
• “RFC 1643: Ethernet-like interface types” on page 8
• “RFC 1757: Remote network monitoring management information base” on page 9
• “RFC 2096: IP forwarding table MIB” on page 9
RFC 1213: Management Information Base (MIB-II)
The following objects from RFC1213 are supported on devices.
The following groups from RFC 1213 are not supported.
• at
NOTE
The table ipNetToMediaTable (OID 1.3.6.1.2.1.4.22) is used instead of the atTable. The atTable
has been obsoleted in RFC 1213.
Configuration Considerations when using the ipNetToMediaTable:
Disabling forwarding using ipForwarding objects is not supported.
Changing dynamic ARP entries using ipNetToMediaType is not supported. You may only create
or delete static ARP entries.
• egp
Object Group Name Object Identifier
system 1.3.6.1.2.1.1
interfaces 1.3.6.1.2.1.2
ifTable 1.3.6.1.2.1.2.2
ifEntry 1.3.6.1.2.1.2.2.1
ifIndex (See note below.) 1.3.6.1.2.1.2.2.1.1
ip 1.3.6.1.2.1.4
icmp 1.3.6.1.2.1.5
tcp 1.3.6.1.2.1.6
udp 1.3.6.1.2.1.7
transmission 1.3.6.1.2.1.10
snmp 1.3.6.1.2.1.11
rmon 1.3.6.1.2.1.16
dot1dBridge 1.3.6.1.2.1.17