Trap receiver table – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 261

Brocade Virtual ADX MIB Reference
249
53-1003312-01
Objects for traps
NOTE
To delete a trap receiver, the agent needs the following varbinds in the setRequest PDU:
snAgTrpRcvrIpAddr, snAgTrpRcvrCommunityOrSecurityName, and snAgTrpRcvrStatus. The
snAgTrpRcvrStatus object must be set to delete(3).
Trap receiver table
This table allows you to configure trap receivers for the devices
snAgTrpRcvrSecurityM
odel
brcdIp.1.1.2.3.1.1.6
Syntax: Integer
read-w
rite
Allows configuration of security model (v1, v2c or 3).
snAgTrpRcvrSecurityL
evel
brcdIp.1.1.2.3.1.7
Syntax: Integer
read-w
rite
Allows configuration of the security level (noauth, auth or auth+priv).
Name, OID, and Syntax
Access
Description
fdryTrapReceiverTable
brcdIp.1.1.10.1.1.1
None
The Trap Receiver Table.
fdryTrapReceiverEntry
brcdIp.1.1.10.1.1.1.1
None
An entry in the Trap Receiver Table. This table uses a running
index as the index to the table.
fdryTrapReceiverIndex
brcdIp.1.1.10.1.1.1.1.1
Syntax: Unsigned32
None
The index to the Trap Receiver Table.
fdryTrapReceiverAddrType
brcdIp.1.1.10.1.1.1.1.2
Syntax: InetAddressType
Read-create The IP address type. Supported address types are:
•
ipv4(1)
•
ipv6(2)
Default: ipv4
fdryTrapReceiverAddr
brcdIp.1.1.10.1.1.1.1.3
Syntax: InetAddress
Read-create The IP address of the SNMP manager that will receive the trap.
fdryTrapReceiverCommunityOrS
ecurityName
brcdIp.1.1.10.1.1.1.1.4
Syntax: OctetString
(size(0..32))
Read-create The community string to use to access the trap receiver. This
object can have up to 32 octets. In the case of USM (SNMPv3)
security model, this object is used to provide the security name.
fdryTrapReceiverUDPPort
brcdIp.1.1.10.1.1.1.1.5
Syntax: Integer32
(0..65535)
Read-create The UPD port number of the trap receiver.
Valid value: 0 – 65535
Default: 162
fdryTrapReceiverSecurityModel
brcdIp.1.1.10.1.1.1.1.6
Syntax: SecurityModel
Read-create The version of trap format to be used.
Default: v1
Name, OID, and Syntax
Access
Description