Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 176)

164 Brocade Virtual ADX MIB Reference
53-1003312-01
CPU utilization
The snAgentCpu table was created because switch families evolved from a single-CPU system to a
multi-CPU system and CPU utilization information for to non-management CPUs were required.
CPU utilization
The following objects monitor CPU utilization in all devices. Refer to the configuration guide for a
product for additional information on this feature.
NOTE
Before attempting to read any CPU polling information, enable CPU polling by setting
snAgGblCpuUtilCollect to 1 or issuing the cpu-usage on CLI command.
System CPU utility table
The snAgentCpuUtilTable is available on all devices, except on ServerIron ADX products.
brcdIp.1.1.2.11.1.1.3 snAgentCpuUtilInterval
brcdIp.1.1.2.11.1.1.4 snAgentCpuUtilValue
brcdIp.1.1.2.11.1.1.5 snAgentCpuUtilPercent
brcdIp.1.1.2.11.1.1.6 snAgentCpuUtil100thPercent
Name, OID, and Syntax Access Description
snAgGblCpuUtilData
brcdIp.1.1.2.1.35
Syntax: Gauge Read only Shows the CPU utilization since the last time the same command
was given.
snAgGblCpuUtilCollect
brcdIp.1.1.2.1.36
Syntax: Integer Read-write Enables or disables the collection of CPU utilization statistics in a
device. This can be one of the following:
•
Enable(1)
•
Disable(0)
snAgGblCpuUtil1SecAvg
brcdIp.1.1.2.1.50
Syntax: Gauge32 Read only Shows CPU utilization every one second.
snAgGblCpuUtil5SecAvg
brcdIp.1.1.2.1.51
Syntax: Gauge32 Read only Shows CPU utilization every 5 seconds.
snAgGblCpuUtil1MinAvg
brcdIp.1.1.2.1.52
Syntax: Gauge32 Read only Shows CPU utilization every one minute.
Name, OID, and Syntax Access Description
snAgentCpuUtilTable
brcdIp.1.1.2.11.1 None A table listing the utilization of all CPUs in a device.
snAgentCpuUtilEntry
brcdIp.1.1.2.11.1.1 None A row in the CPU utilization table.