Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 213)

Brocade Virtual ADX MIB Reference 201
53-1003312-01
Virtual server objects
snL4VirtualServerStatisticTransmitByte
s
brcdIp.1.1.4.25.1.1.7
Syntax: Counter64 Read only The number of bytes the switch has sent to the real server
snL4VirtualServerStatisticSymmetricSt
ate
brcdIp.1.1.4.25.1.1.8
Syntax: Integer Read only Shows which ServerIron is the active one:
•
other(3) – Not the active ServerIron
•
active(5) – Active ServerIron
snL4VirtualServerStatisticSymmetricPr
iority
brcdIp.1.1.4.25.1.1.9
Syntax: Integer Read only Shows the Symmetric SLB priority configured on the
ServerIron.
snL4VirtualServerStatisticSymmetricK
eep
brcdIp.1.1.4.25.1.1.10
Syntax: Integer Read only This object is applicable only to the active ServerIrons.
Shows the number of times an SSLB backup has failed to
communicate with the active ServerIron. By default, the
counter is incremented by 1 every 400 milliseconds, if the
backup switch is responding slowly to the active switch’s
keepalive message. The counter is reset to 0 each time the
backup switch replies to a keepalive message. If the
counter exceeds the maximum number allowed (20 by
default, thus 8 seconds), the standby switch takes over as
the new active switch. Normally, this field almost always
contains 0.
snL4VirtualServerStatisticSymmetricAc
tivates
brcdIp.1.1.4.25.1.1.11
Syntax: Counter Read only The number of times this ServerIron has become the active
switch.
snL4VirtualServerStatisticSymmetricIn
actives
brcdIp.1.1.4.25.1.1.12
Syntax: Counter Read only Shows the number of times this ServerIron has changed
from being the active switch to the backup switch.
snL4VirtualServerStatisticSymmetricB
estStandbyMacAddr
brcdIp.1.1.4.25.1.1.13
Syntax: Physical address Read only Shows the MAC address of the backup ServerIron with the
second-highest priority. This ServerIron will become the
active switch if a failover occurs.
snL4VirtualServerStatisticSymmetricAc
tiveMacAddr
brcdIp.1.1.4.25.1.1.14
Syntax: Physical address Read only Shows the MAC address of the active ServerIron with the
highest priority. This ServerIron will become the backup
switch if a failover occurs.
snL4VirtualServerStatisticTrackPortList
brcdIp.1.1.4.25.1.1.15
Syntax: DisplayString (SIZE (1..72)) Read-only Virtual port track group port list.
snL4VirtualServerStatisticTrackPortSta
te
brcdIp.1.1.4. 25.1.1.16
Syntax: Integer Read-only Shows the port track-group state.
Valid values:
•
none(0) - the track-group port list is empty
•
up(1)
•
suspect(2)
Name, OID, and Syntax Access Description