Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 35)

Brocade Virtual ADX MIB Reference 23
53-1003312-01
Software configuration
Software configuration
The following sections control common configurations for devices:
• “Switch configuration summary group” on page 27
• “Banners” on page 27
• “Agent global group” on page 28
Switch group configuration
The objects in this group are available in the ServerIron ADX devices. Refer to the chapter “Traps
and Objects to Enable Traps” on page 247 for switch group trap objects.
snAgGblBannerIncoming
rcdIp.1.1.2.1.49
Syntax - DisplayString Read-write Incoming terminal line banner. Insert newlines using '\n' within
the string.
snAgGblBannerMotd
rcdIp.1.1.2.1.49
Syntax - DisplayString Read-write Message-of-the-day banner. Insert newlines using '\n' within the
string.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snSwGroupOperMode
brcdIp.1.1.3.1.1
Syntax: Integer Read-write Indicates if switch ports have VLANs defined:
•
noVLan(1) – All switch ports with no port VLANs and no tag
assigned.
•
vlanByPort(2) – All switch ports with basic port-based VLANs.
snSwGroupIpL3SwMode
brcdIp.1.1.3.1.2
Syntax: Integer Read-write Indicates if the Layer 3 IP switch is enabled for the switch group.
•
disabled(0)
•
enabled(1)
snSwGroupIpMcastMode
brcdIp.1.1.3.1.3
Syntax: Integer Read-write Indicates if the IP multicast pruning mode is enabled for the switch
group.
•
disabled(0)
•
enabled(1)
snSwGroupDefaultCfgMode
brcdIp.1.1.3.1.4
Syntax: Integer Read-write Indicates if the switch group contains a default configuration. If the
default configuration is overwritten, the state will change to
non-default.
•
default(1) – Has a default configuration
•
nonDefault(2) – Has a non-default configuration
snSwGroupSwitchAgeTime
brcdIp.1.1.3.1.5
Syntax: Integer32 Read-write Sets the aging period for ports on the device, defining how long a port
address remains active in the address table.
Valid values: 0 = no aging, or 67 – 65535 seconds
Default: 300 seconds
snVLanGroupVlanCurEntry
brcdIp.1.1.3.1.6
Syntax: Integer32 Read only Shows the number of VLANs that are currently configured.