Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 160)

148 Brocade Virtual ADX MIB Reference
53-1003312-01
OSPF redistribution of routes table
OSPF redistribution of routes table
The OSPF Redistribution of Routes Table contains a list of routes that will be used to decide
whether a particular RIP or static route is to be imported into OSPF domain. Routes will be imported
if the parameter “Import Route into OSPF” is enabled. They will be imported as external type 2
routes.
Name, OID, and Syntax Access Description
snOspfRedisTable
brcdIp.1.2.4.6.1 None The OSPF Redistribution Table contains a list of routes that could
be imported into the OSPF domain.
snOspfRedisEntry
brcdIp.1.2.4.6.1.1 None An entry in the OSPF Redistribution Table
snOspfRedisIndex
brcdIp.1.2.4.6.1.1.1
Syntax: Integer Read only An ID identifying this destination route.
There can be up to 64 entries for this object.
snOspfRedisIpAddress
brcdIp.1.2.4.6.1.1.2
Syntax: IpAddress Read-write Shows the destination IP address that is associated with this
particular route.
snOspfRedisMask
brcdIp.1.2.4.6.1.1.3
Syntax: IpAddress Read-write Shows the subnet mask of this route.
snOspfRedisAction
brcdIp.1.2.4.6.1.1.4
Syntax: Integer Read-write Specifies what action to be taken if the route matches this entry:
•
noImport(0) – Do not import route into the OSPF domain
•
import(1) – Import the route is into OSPF domain as external
type 2 route
snOspfRedisProtocol
brcdIp.1.2.4.6.1.1.5
Syntax: Integer Read-write Specifies how routes are imported into the OSPF domain:
•
rip(1) – the RIP route.
•
all(2) – all protocol route.
•
static(3) – the static route.
•
bgp(4) – the BGP route.
•
connected(5) – the connected route.
•
isis(6) – the ISIS route.
snOspfRedisSetOspfMetric
brcdIp.1.2.4.6.1.1.6
Syntax: Integer Read-write The value indicates to which the route metric should match:
•
disabled(0) – the route metric does NOT match the OSPF
metric field.
•
enabled(1) – the route metric matches the OSPF metric field.
snOspfRedisOspfMetricValue
brcdIp.1.2.4.6.1.1.7
Syntax: Integer Read-write Specifies the cost of using this type of service (TOS) on this
interface.
Valid values: 0 – 65535.
snOspfRedisMatchRipMetric
brcdIp.1.2.4.6.1.1.8
Syntax: Integer Read-write The value indicates to which the route metric should match:
•
disabled(0) – the route metric does NOT match the RIP metric
field.
•
enabled(1) – the route metric matches the RIP metric field.