beautypg.com

Fdrylinkaggregationgrouptable – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual

Page 77

background image

Brocade Virtual ADX MIB Reference

65

53-1003312-01

Link Aggregation Group (LAG) table

fdryLinkAggregationGroupTable

The fdryLinkAggregationGroupTable replaces the snLinkAggregationGroupTable.

snLinkAggregationGroupRowStat
us
brcdIp.1.1.3.30.1.1.1.11
Syntax: RowSts

Read-create

Displays the status of this conceptual row.
NOTE: createAndWait(5) is not supported.
To create a row in this table, a manager must set this object
to createAndGo(4) together with the setting of
snLinkAggregationGroupType. After that the row status
becomes active(1) regardless the LAG entry is deployed or
not.
To deploy the LAG entry, set the corresponding instance of
snLinkAggregationGroupAdminStatus to deployActive or
deployPassive.

snLinkAggregationGroupId
brcdIp.1.1.3.30.1.1.1.12
Syntax: Unsigned 32

Read only

The numeric identifier assigned to this LAG.

Name, OID, and Syntax

Access

Description

fdryLinkAggregationGroupTable
brcdIp.1.1.3.33.1.1

None

The fdryLinkAggregation table.

fdryLinkAggregationGroupEntry
brcdIp.1.1.3.33.1.1.1

None

An entry of the Link Aggregation table,

fdryLinkAggregationGroupName
brcdIp.1.1.3.33.1.1.1.1
Syntax: DisplayString (Size(1..255))

None

Displays the name of a LinkAggregationGroup.

fdryLinkAggregationGroupType
brcdIp.1.1.3.33.1.1.1.2
Syntax: Integer

Read-create Displays the LinkAggregationGroup type.

fdryLinkAggregationGroupAdminStatus
brcdIp.1.1.3.33.1.1.1.3
Syntax: Integer

Read-create Displays the desired deployed state of this

LinkAggregationGroup entry.
NOTE: This is not the operational status. Refer to ifTable

for the operational status.

deploy(1)- deploy the LAG and set to LACP active if
dynamic LAG.

deployPassive(2)-deploy the LAG and set to LACP
passive if dynamic LAG.

undeploy(3)-undeploy the LAG if no more than 2
ports are enabled.

undeployForced(4)-undeploy the LAG regardless
number of ports enabled.

NOTE: undeployForced(4)is a write-only value. In

particular, a row cannot be deployed until the
corresponding instances of
fdryLinkAggregationGroupIfList has been set.

fdryLinkAggregationGroupIfList
brcdIp.1.1.3.33.1.1.1.4
Syntax: OctetString

Read-create Displays a list of interface indices which are the port

membership of a trunk group. Each interface index is a
32-bit integer in big endian order.
NOTE: This object accepts 32-bit integer only.

Name, OID, and Syntax

Access

Description