Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 177)

Brocade Virtual ADX MIB Reference 165
53-1003312-01
Dynamic memory utilization
brcdAdxCpuUtilTable
Use the brcdAdxCpuUtilTable for ServerIron ADX products.
Dynamic memory utilization
The following objects manage dynamic memory utilization in all devices, except for stackable
ServerIron and ServerIron XL. There are no objects for memory utilization in the stackable
ServerIron. Refer to the configuration guide for a product for additional information on this feature.
snAgentCpuUtilSlotNum
brcdIp.1.1.2.11.1.1.1
Syntax: Integer32 Read only Shows the slot number of the module that contains that has at least
CPU.
snAgentCpuUtilCpuId
brcdIp.1.1.2.11.1.1.2
Syntax: Integer32 Read only Shows the ID of the CPU:
•
1 – Management CPU
•
2 or greater – Slave CPU
A non-VM1/WSM management module has one CPU.
A VM1/WSM module has one management CPU and 3 slave CPUs. The
management CPU could be turned off.
POS and ATM modules have no management CPU but have two slave
CPUs.
snAgentCpuUtilInterval
brcdIp.1.1.2.11.1.1.3
Syntax: Integer32 Read only Shows the CPU utilization in seconds.
CPU utilization of a primary module is displayed in 1, 5, 60, and 300
second intervals.
CPU utilization of a secondary module is displayed in 1, 5, 60, and 300
second intervals.
This object can return an additional 300 sec CPU utilization.
snAgentCpuUtilValue
brcdIp.1.1.2.11.1.1.4
Syntax: Gauge32 Read only Shows the CPU utilization in one-hundredths of a percent.
This object is indexed by snAgentCpuUtilSlotNum,
snAgentCpuUtilCpuId, and snAgentCpuUtilInterval.
This object should return the same value as snAgGblCpuUtil1SecAvg,
snAgGblCpuUtil5SecAvg, or snAgGblCpuUtil1MinAvg if you query the
managment CPU.
snAgentCpuUtilPercent
brcdIp.1.1.2.11.1.1.5
Syntax: Gauge32 Read only The statistical CPU utilization in units of a percent.
snAgentCpuUtil100thPerce
nt
brcdIp.1.1.2.11.1.1.6
Syntax: Gauge32 Read only The statistical CPU utilization in units of one-hundredth
of a percent.
Name, OID, and Syntax Access Description