Vlan by port membership table – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 115
Brocade Virtual ADX MIB Reference
103
53-1003312-01
VLAN by port membership table
VLAN by port membership table
The following table is the Port VLAN (Layer 2 VLAN) port membership table.
snVLanByPortBaseBridgeAd
dress
brcdIp.1.1.3.2.1.1.24
Syntax: BridgeId
Read only
Indicates the value of the dot1dBaseBridgeAddress, which is the
MAC address used by this bridge when it must be referred to in a
unique fashion.
It is recommended that this is the smallest MAC address of all ports
that belong to this bridge; however it must be unique. When
concatenated with dot1dStpPriority a unique BridgeIdentifier is
formed which is used in the STP.
snVLanByPortVLanName
brcdIp.1.1.3.2.1.1.25
Syntax: DisplayString
Read-write
Indicates the name of the community string that is allowed to
access the VLAN.
Valid values: Up to 32 characters.
snVLanByPortRouterIntf
brcdIp.1.1.3.2.1.1.26
Syntax: Integer32
Read-write
Is optional and applies only to routers.
It shows the ID of the virtual interface of a router to the VLAN.
If an SNMP-Get value is zero, then this object was not configured.
Valid values: 1 – 60.
snVLanByPortChassisPortM
ask
brcdIp.1.1.3.2.1.1.27
Syntax: OctetString
Read-write
Applies only to devices running Release 07.1.00 and earlier. It is
replaced by
for later releases.
It shows the VLAN switch port membership.
This object has 32 octets.
snVLanByPortPortList
brcdIp.1.1.3.2.1.1.28
Syntax: OctetString
Read-write
Applies to all devices except ServerIron products.
It lists the membership of a VLAN By Port. Each port index is a 16-bit
integer in big endian order. The first 8-bits are the slot number, the
other 8-bits are the port number.
Name, OID, and Syntax
Access
Description
Name, OID, and Syntax
Access
Description
snVLanByPortMemberTable
brcdIp.1.1.3.2.6
None
This table is used to create or delete a port VLAN (Layer 2 VLAN)
entry.
snVLanByPortMemberEntry
brcdIp.1.1.3.2.6.1
None
An entry in the Port VLAN Port Membership table.
snVLanByPortMemberVLanId
brcdIp.1.1.3.2.6.1.1
Syntax: Integer
Read only
The VLAN identifier (VLAN ID).
Valid values: 1 – 4095 VLAN IDs.