Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 24)

12 Brocade Virtual ADX MIB Reference
53-1003312-01
RFC 2863: The interfaces group MIB
ifXTable attributes
The following MIB attributes of the ifXTable return information for switched and routed packets.
IF-MIB (RFC 2863) ifTable Objects
Statistics from the following objects in the ifTable are preserved when the snmp-server
preserve-statistics command is enabled on the CLI. This means that when the command clear
statistics is entered on the CLI, the command clears only CLI
statistics, leaving the SNMP statistics intact.
IF-MIB (RFC 2863) ifXTable Objects
ifInDiscards Always returns 0
ifInErrors Always returns 0
ifInUnknownProtos Always returns 0
ifOutNUcastPkts Always returns 0
ifOutDiscards Always returns 0
ifOutErrors Always returns 0
MIB attribute Information attribute returns
ifHCInOctets Total Rx bytes in this virtual routing interface
(64 bit counter)
ifHCOutOctets Total Tx bytes in this virtual routing interface
(64 bit counter)
ifHCInUcastPkts Total Rx packets in this virtual routing interface
(64 bit counter)
ifHCOutUcastPkts Total Tx packets in this virtual routing interface
(64 bit counter)
ifInMulticastPkts Always returns 0
ifInBroadcastPkts Always returns 0
ifOutMulticastPkts Always returns 0
ifOutBroadcastPkts Always returns 0
ifHCInMulticastPkts Always returns 0
ifHCInBroadcastPkts Always returns 0
ifHCOutMulticastPkts Always returns 0
ifHCOutBroadcastPkts Always returns 0
MIB attribute Syntax
ifInOctets Counter32
ifInUcastPkts Counter32
ifInNUcastPkts Counter32-- deprecated
MIB attribute Information attribute returns