Vlan car objects – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 107
Brocade Virtual ADX MIB Reference
95
53-1003312-01
CAR
VLAN CAR objects
The objects in the following table contain the rate limit configuration for VLANs. This table is
indexed by the
objects.
snPortCARExceedAction
brcdIp.1.1.3.16.1.1.1.10
Syntax: Integer
Read only
Indicates what happens to packets when the traffic exceeds the Rate
Limit.
•
continue(1) – Continue to evaluate the subsequent rate limits.
•
drop(2) – Drop the packet.
•
precedCont(3) – Rewrite the IP precedence and transmit the
packet.
•
precedXmit(4) – Rewrite the IP precedence and transmit the
packet.
•
xmit(5) – Transmit the packet.
snPortCARStatSwitchedP
kts
brcdIp.1.1.3.16.1.1.1.11
Syntax: Counter64
Read only
Indicates the number of packets permitted by this rate limit.
snPortCARStatSwitchedB
ytes
brcdIp.1.1.3.16.1.1.1.12
Syntax: Counter64
Read only
Indicates the number of bytes permitted by this interface.
snPortCARStatFilteredPk
ts
brcdIp.1.1.3.16.1.1.1.13
Syntax: Counter64
Read only
Indicates the number of packets which exceeded this rate limit.
snPortCARStatFilteredByt
es
brcdIp.1.1.3.16.1.1.1.14
Syntax: Counter64
Read only
Indicates the number of bytes which exceeded this rate limit.
snPortCARStatCurBurst
brcdIp.1.1.3.16.1.1.1.15
Syntax: Gauge32
Read only
Shows the current burst size of received.
Name, OID, and Syntax
Access
Description
snVLanCARTable
brcdIp.1.1.3.17.1.1
None
The VLAN rate limit table.
snVLanCAREntry
brcdIp.1.1.3.17.1.1.1
None
An entry in the VLAN CAR Table.
snVLanCARVLanId
brcdIp.1.1.3.17.1.1.1.1
Syntax: Integer
Read only
Shows the VLAN ID. VLAN ID is one of the indices of this table. Each
VLAN ID can have a membership of multiple ports.
Valid values: 1 – 4095
snVLanCARDirection
brcdIp.1.1.3.17.1.1.1.2
Syntax: Integer
Read only
Specifies the transmission direction of the Rate-Limit object.
•
input(0) – for inbound traffic
•
output(1) – for outbound traffic
Name, OID, and Syntax
Access
Description