Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 272)

260 Brocade Virtual ADX MIB Reference
53-1003312-01
Virtual ADX traps
General traps (Proprietary)
The following table presents the general traps for the Virtual ADX devices.
Trap Name and Number Varbinds Severity Description and Trap Message
snTrapChasFanOK
brcdIp.0.1000 snChasFanIndex,
snChasFanDescripti
on Minor One of the following occurred on the device:
•
A fan’s operational status changed from
failure to normal
•
Fan speed changed due to a decrease in
the operationg temperature
Sample Trap Message:
Right fan tray (fan1) OK
snTrapTemperatureOK
brcdIp.0.1001 snAgGblTrapMessa
ge Critical The actual temperature reading on the device
is below the warning temperature threshold.
Samples of Trap Messages:
Switch Fabric 2 temperature
30.2 C degrees is normal
Switch Fabric 2 temperature
30.2 C degrees is normal
Linecard Module %d PCB
temperature 30.2 C degrees is
normal
Linecard Module %d XPP
temperature 30.2 C degrees is
normal
Active mgmt CPU temperature 30.2
C degrees is normal
Standby mgmt CPU temperature
30.2 C degrees is normal
snTrapCAMOverflow
brcdIp.0.1002 snAgGblTrapMessa
ge Alerts One of the IP CAM level is full.
Sample Trap Message:
NO MORE FREE CAM SPACE for IP
level .
snTrapChassisFanSpeedLo
w
brcdIp.0.1200 snAgGblTrapMessa
ge Informational The speed of all chassis fans changed to low.
Sample Trap Message:
System: Set fan speed to LOW
(50%%)
snTrapChassisFanSpeedM
edium
brcdIp.0.1201 snAgGblTrapMessa
ge Informational The speed of all chassis fans changed to
medium.
Sample Trap Message:
System: Set fan speed to MED
(75%%)
snTrapChassisFanSpeedM
edHigh
brcdIp.0.1202 snAgGblTrapMessa
ge Informational The speed of all chassis fans changed to
medium high.
Sample Trap Message:
System: Set fan speed to MED-HI
(90%%)
snTrapChassisFanSpeedHi
gh
brcdIp.0.1203 snAgGblTrapMessa
ge Informational The speed of all chassis fans changed to high.
Sample Trap Message:
System: Set fan speed to HI
(100%%)