Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual
Page 125
Brocade Virtual ADX MIB Reference
113
53-1003312-01
Port VLAN configuration table
snVLanByPortCfgStpGrou
pForwardDelay
brcdIp.1.1.3.2.7.1.7
Syntax: Integer
Read-write
Shows the value of dot1dStpBridgeForwardDelay, which is the value
used by all bridges for ForwardDelay when this bridge is acting as the
root.
NOTE: 802.1D-1990 specifies that the range for this parameter is
related to the value of dot1dStpBridgeMaxAge, which is in the
object
The granularity of this timer is specified by 802.1D-1990 to be
one second. An agent may return a badValue error if a set is
attempted to a value which is not a whole number of seconds.
(Refer to RFC1493 Bridge MIB).
Valid values: 2 – 30.
snVLanByPortCfgBaseNu
mPorts
brcdIp.1.1.3.2.7.1.8
Syntax: Integer
Read-only
The number of ports controlled by this bridging entity.
snVLanByPortCfgBaseTyp
e
brcdIp.1.1.3.2.7.1.9
Syntax: Integer
Read-only
Indicates what type of bridging this bridge can perform. If a bridge is
actually performing a certain type of bridging this will be indicated by
entries in the port table for the given type.
•
unknown(1)
•
transparent-only(2)
•
sourceroute-only(3)
•
srt(4)
snVLanByPortCfgStpProt
ocolSpecification
brcdIp.1.1.3.2.7.1.10
Syntax: Integer
Read-only
Shows what version of STP is being run:
•
unknown(1)
•
decLb100(2) – Indicates the DEC LANbridge 100 Spanning Tree
protocol
•
ieee8021d(3) – Return "ieee8021d(3)". If future versions of the
IEEE Spanning Tree Protocol are released that are incompatible
with the current version, a new value will be defined.
snVLanByPortCfgStpMax
Age
brcdIp.1.1.3.2.7.1.11
Syntax: Integer
Read-only
Shows the value of dot1dStpMaxAge, which is the maximum age that
the STP information can exist before it is discarded. The STP
information is learned from the network. The value of this object is in
hundredths of a second, and is the actual value that this bridge is
currently using.
(Refer to RFC1493 Bridge MIB.)
snVLanByPortCfgStpHell
oTime
brcdIp.1.1.3.2.7.1.12
Syntax: Timeout
Read-only
Shows the value of dot1dStpHelloTime, which is the interval between
the transmission of Configuration bridge PDUs by this node. This value
applies to any port when it is the root of the spanning tree or is trying to
become the root. This is the actual value that this bridge is currently
using.
This value is in hundredths of a second.
(Refer to RFC1493 Bridge MIB.)
snVLanByPortCfgStpHold
Time
brcdIp.1.1.3.2.7.1.13
Syntax: Integer
Read-only
Shows the value of dot1dStpHoldTime, which is the interval when no
more than two Configuration bridge PDUs shall be transmitted by this
node. The interval is in units of hundredths of a second.
(Refer to RFC1493 Bridge MIB.)
Name, OID, and Syntax
Access
Description