Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 149)

Brocade Virtual ADX MIB Reference 137
53-1003312-01
OSPF area table
OSPF area table
The OSPF Area Data Structure contains information that describes the various OSPF areas. The
interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the
Backbone Area.
Reference: RFC 1583 “OSPF Version 2”, section 6 The Area Data Structure.
snOspfExtLsdbLimit
brcdIp.1.2.4.1.11
Syntax: Integer32 Read-write Provides compliance with RFC 1765 in the handling of OSPF external
link-state database (LSDB) overflow
Specifies the maximum number of non-default AS-external-LSAs
entries that can be stored in the link-state database. When the number
of non-default AS-external-LSAs in a router’s link-state database
reaches ospfExtLsdbLimit, the router enters Overflow State.The router
never holds more than ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set identically in all routers
attached to the OSPF backbone and any regular OSPF area. (i.e., OSPF
stub areas and NSSAs are excluded).
Valid values: 1 – 2000. If the value is -1, then there is no limit.
snOspfExitOverflowInterv
al
brcdIp.1.2.4.1.12
Syntax: Integer Read-write Specifies the number of seconds that a router will attempt to leave the
overflow state once it is in that state. This value allows the router to
again originate non-default AS-external-LSAs. If this object is set to 0,
the router will not leave the overflow state until it is restarted.
Valid values: 0 – 86400 seconds.
snOspfRfc1583Compatibi
lity
brcdIp.1.2.4.1.13
Syntax: Integer Read-write Specifies if the OSPF route is compatible with RFC1583 or RFC2178:
•
disabled(0) – Compatible with RFC 2178.
•
enabled(1) – Compatible with RFC 1583.
snOspfRouterIdFormat
brcdIp.1.2.4.1.14
Syntax: Integer Read-write Specifies the format of how Router ID will be entered in the
“snOspfRouterId” object:
•
integer(0) – Integer.
•
ipAddress(1) – IP address.
snOspfDistance
brcdIp.1.2.4.1.15
Syntax: Integer Read-write Determines the OSPF administrative distance for intra-area routes.
Default: 110
Valid values: 1 – 255
snOspfDistanceIntra
brcdIp.1.2.4.1.16 Read-write Determines the OSPF administrative distance for intra-area routes.
Default: 110
Valid values: 1 – 255
snOspfDistanceInter
brcdIp.1.2.4.1.17
Syntax: Integer Read-write Determines the OSPF administrative distance for inter-area routes.
Default: 110
Valid values: 1 – 255
snOspfDistanceExternal
brcdIp.1.2.4.1.18
Syntax: Integer Read-write Determines the OSPF administrative distance for external routes.
Valid values: 1 – 255
Default: 110
Name, OID, and Syntax Access Description