Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 65)

Brocade Virtual ADX MIB Reference 53
53-1003312-01
Switch port information
snSwIfInfoSpeed
brcdIp.1.1.3.3.5.1.7
Syntax: Integer Read-write Indicates the speed configuration for a port:
•
none(0) – Link down or no traffic.
•
sAutoSense(1) – Auto-sensing 10 or 100Mbits.
•
s10M(2) – 10Mbits per second.
•
s100M(3) – 100Mbits per second.
•
s1G(4) – 1Gbits per second.
•
s45M(5) – 45Mbits per second (T3) (for expansion board
only).
•
s155M(6) – 155Mbits per second (ATM) (for expansion
board only).
•
s10G(7) – 10Gbits per second.
•
s622M(8) – OC12 - 622Mbits per second.
•
s2488M(9) – OC48 - 2.488Gbits per second.
•
s9953M(10) – OC192 - 9.953Gbits per second.
The read-back hardware status are the following:
•
none(0) – Link down or no traffic.
•
s10M(2) – 10Mbits per second.
•
s100M(3) – 100Mbits per second.
•
s1G(4) – 1Gbits per second.
•
s45M(5) – 45Mbits per second (T3) (for expansion board
only).
•
s155M(6) – 155Mbits per second (ATM) (for expansion
board only).
•
s10G(7) – 10Gbits per second.
•
s622M(8) – OC12 - 622Mbits per second.
•
s2488M(9) – OC48 - 2.488Gbits per second.
•
s9953M(10) – OC192 - 9.953Gbits per second.
The port media type (expansion or regular) and port link type
(trunk or feeder) determine whether this object can be written
and the valid values for this object. It is not allowed to change
speed for trunks ports. For expansion ports, all of the above
speeds can be set; however, the value of this parameter may be
automatically set whenever the expansion port is connected, for
example, in the case of cascade connecting device.
snSwIfInfoMediaType
brcdIp.1.1.3.3.5.1.8
Syntax: Integer Read only Shows the media type for the port:
•
other(1) – other or unknown media.
•
m100BaseTX(2) – 100Mbits per second copper.
•
m100BaseFX(3) – 100Mbits per second fiber.
•
m1000BaseFX(4) – 1Gbits per second fiber.
•
mT3(5) – 45Mbits per second (T3).
•
m155ATM(6) – 155Mbits per second (ATM).
•
m1000BaseTX(7) – 1Gbits per second copper.
•
m622ATM(8) – 622Mbits per second (ATM).
•
m155POS(9) – 155Mbits per second (POS).
•
m622POS(10) – 622Mbits per second (POS).
•
m2488POS(11) – 2488Mbits per second (POS).
•
m10000BaseFX(12) – 10Gbits per second fiber.
•
m9953POS(13) – 9953Mbits per second (POS).
Name, OID, and Syntax Access Description