beautypg.com

Multi-slot trunk port table, Link aggregation group (lag) table, Snlinkaggregationgrouptable – Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual

Page 75

background image

Brocade Virtual ADX MIB Reference

63

53-1003312-01

Multi-slot trunk port table

Multi-slot trunk port table

The snMSTrunkTable has been made obsolete and replaced with the snMSTrunkIfTable as
described in the following.

Link Aggregation Group (LAG) table

snLinkAggregationGroupTable

The snMSTrunkIfTable has replaced with the snLinkAggregationGroupTable as described in the
following table. However, the snLinkAggregationGroupTable has been made obsolete and has been
replaced by the fdryLinkAggregationGroupTable.

Name, OID, and Syntax

Access

Description

snMSTrunkIfTable
brcdIp.1.1.3.6.3

None

The Multi-slot Trunk Interface Configuration Table.

snMSTrunkIfEntry
brcdIp.1.1.3.6.3.1

None

An entry of the Multi-slot Trunk Interface Configuration Table.

snMSTrunkIfIndex
brcdIp.1.1.3.6.3.1.1
Syntax: Integer

Read only

Identifies the port that is the primary port of a trunk group.
For module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.

snMSTrunkIfList
brcdIp.1.1.3.6.3.1.2
Syntax: OctetString

Read-write

Contains a list of port indices that are members of a trunk group.
Each port index is a 32-bit integer in big endian order. The first
interface/port index must be the index of the primary port.

snMSTrunkIfType
brcdIp.1.1.3.6.3.1.3
Syntax: Integer

Read-write

Specifies if the ports are connected to a switch or a server:

switch(1)

server(2)

snMSTrunkIfRowStatus
brcdIp.1.1.3.6.3.1.4
Syntax: Integer

Read-write

Creates, deletes, or modifies an entry in this table:

invalid(1)

valid(2)

delete(3)

create(4)

modify(5)

Name, OID, and Syntax

Access

Description

snLinkAggregationGroupTable
brcdIp.1.1.3.30.1.1

None

The snLinkAggregation table.

snLinkAggregationGroupEntry
brcdIp.1.1.3.30.1.1.1

None

An entry of the Link Aggregation table,

snLinkAggregationGroupName
brcdIp.1.1.3.30.1.1.1.1
Syntax: DisplayString
(Size(1..255))

None

Displays the name of a LinkAggregationGroup.