Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 181)

Brocade Virtual ADX MIB Reference 169
53-1003312-01
sFlow
sFlow
This section presents the sFlow objects that are proprietary to products. This section presents the
following objects:
“sFlow source” on page 169
• “sFlow collector” on page 169
Refer to the configuration guide for a product for details on sFlow.
sFlow source
The following object supports the sFlow feature, which is available on certain modules.
sFlow collector
Currently, RFC 3176 allows only one sFlow destination to be configured. To configure two or more
destinations, use the following table.
Name, OID, and Syntax Access Description
snAgSFlowSourceInterface
brcdIp.1.1.2.1.59
Syntax: InterfaceIndex Read-write Identifies the source interface for sFlow packets sent by the device
that is running sFlow Export.
Use the ifIndex value for this object to specify the source interface
to be used. The interface should have an IP address configured for
sFlow. A value of 0 indicates that source interface has not been
configured for sFlow. Port 65534 is used to specify a null port.
Name, OID, and Syntax Access Description
snSflowCollectorTable
brcdIp.1.1.3.19.2 None Table of sFlow collectors, beginning with the second collector.
Configure the first sFlow collector using the sFlowCollectorAddress
and sFlowCollectorPort objects in the RFC 3176 sFlowTable.
snSflowCollectorEntry
brcdIp.1.1.3.19.2.1 None A row in the sflow collector table
snSflowCollectorIndex
brcdIp.1.1.3.19.2.1.1
Syntax: Integer32 Read only The index to the sFlow collector table
snSflowCollectorIP
brcdIp.1.1.3.19.2.1.2
Syntax: IpAddress Read-write The IP address of the sFlow collector