beautypg.com

Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) User Manual

Page 275

background image

Brocade Virtual ADX MIB Reference

263

53-1003312-01

Virtual ADX traps

snOspfNbrStateChange
1.3.6.1.2.1.14.16.2.5

snOspfRouterId (The
originator of the trap)
snOspfNbrIpAddr
snOspfNbrRtrId
snOspfNbrState (The
new state)

Informational

There has been a change in the state of a
non-virtual OSPF neighbor. This trap
should be generated when the neighbor
state regresses (e.g., goes from Attempt or
Full to 1-Way or Down) or progresses to a
terminal state (e.g., 2-Way or Full). When
an neighbor transitions from or to Full on
non-broadcast multi-access and broadcast
networks, the trap should be generated by
the designated router. A designated router
transitioning to Down will be noted by
ospfIfStateChange.
NOTE: You must configure the log

adjacency command under the
"router ospf" mode to see traps.

Sample Trap Message:
OSPF router id

neighbor area

,neighbor

router id

state changed to

.

snOspfVirtNbrStateChang
e
1.3.6.1.2.1.14.16.2.6

snOspfRouterId (The
originator of the trap)
snOspfVirtNbrArea
snOspfVirtNbrRtrId
snOspfVirtNbrState
(The new state)

Informational

There has been a change in the state of an
OSPF virtual neighbor. This trap should be
generated when the neighbor state
regresses (e.g., goes from Attempt or Full
to 1-Way or Down) or progresses to a
terminal state (e.g., Full).
NOTE: You must configure the log

adjacency command under the
"router ospf" mode to see traps.

Sample Trap Message:
OSPF router id

virtual

neighbor area

, virtual

neighbor router id

state

changed to

.

snOspfIfConfigError
1.3.6.1.2.1.14.16.2.7

snOspfRouterId (The
originator of the trap)
snOspfIfStatusIpAddres
s
snOspfPacketSrc (The
source IP address)
snOspfConfigErrorType
(Type of error)
snOspfPacketType

Major

A packet has been received on a
non-virtual interface from a router whose
configuration parameters conflict with this
router’s confi guration parameters.
NOTE: The event optionMismatch should

cause a trap only if it prevents an
adjacency from forming.

Trap Message:
Configuration error type

with

packet type

has been received on interface

,

router id

from

.

Trap Name and Number

Varbinds

Severity

Description and Trap Message